[astharot]

Corcomp rs232 is strange.. i discovered that no work if i have corcomp FDC card.
This is PEB configuration:
PE cable Slot 1
TI-RAM 32K Slot 2
Horizon 2000 Slot 3
CC rs232 Slot 7
CC FDC Slot 8
Computer go in crash at power on.
Leave CC FDC at insert TI FDC and computer is working and if i write command OLD RS232 the CC rs232 card light on.. at now seem that CC rs232 and cc fdc have equal address / irq or that go in conflict.. every one have jumper info for cc rs232??
Thanks