Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
PEB loaded full of stuff
#2
Hi, thanks for popping into the forum. Several of us here can help you identify the components you have in your PEB. I take it you know how to remove the top cover by popping the two spring tabs at the back of the box. From your description, you probably have a 32K memory card, and RS-232 card, and a Disk Controller card in the box. It will also have a Flex Cable Interface card (with the long flat cable that connects to the side of the console). All of your cards may be original TI--or some of them may be from other vendors. That's the first thing to know for sure, as some of the third-party hardware is more valuable. A normal TI PEB with TI cards will usually sell for between $100 and $200, shipped. You will see somewhat higher prices for some of the TI stuff quite often on eBay but they usually don't sell unless someone is really in immediate need of what's on sale.

Once we're sure what you have, I can cross-post your notice to a couple of additional TI Fora. . .
Enter my mind at your own risk!


Messages In This Thread
PEB loaded full of stuff - by Maxwelhse - 06-27-2014, 05:49 PM
RE: PEB loaded full of stuff - by ksarul - 06-27-2014, 09:42 PM
RE: PEB loaded full of stuff - by Maxwelhse - 06-28-2014, 12:21 AM
RE: PEB loaded full of stuff - by ksarul - 06-29-2014, 06:02 PM
RE: PEB loaded full of stuff - by Maxwelhse - 06-29-2014, 06:14 PM
RE: PEB loaded full of stuff - by ksarul - 06-30-2014, 10:01 PM
RE: PEB loaded full of stuff - by Maxwelhse - 06-30-2014, 10:15 PM
RE: PEB loaded full of stuff - by sjt99 - 07-09-2014, 04:16 PM
RE: PEB loaded full of stuff - by Morebits - 07-16-2014, 10:38 PM
RE: PEB loaded full of stuff - by Maxwelhse - 07-17-2014, 03:16 AM
RE: PEB loaded full of stuff - by Morebits - 07-24-2014, 10:21 PM
RE: PEB loaded full of stuff - by Maxwelhse - 07-25-2014, 11:22 PM
RE: PEB loaded full of stuff - by Maxwelhse - 07-25-2014, 11:23 PM
RE: PEB loaded full of stuff - by ksarul - 08-30-2014, 07:28 PM

Forum Jump:


Users browsing this thread: 4 Guest(s)